Critical Safety Shutdown Valve Actuators for United Kingdom

by | Feb 7, 2014 | Industry, Oil & Gas, Valves, Actuators & Regulators

Jim Cahill

Jim Cahill

Chief Blogger, Social Marketing Leader

Imagine 30% of a country’s energy supply relying on two safety shutdown valves to flow natural gas and liquid condensate safely from offshore oil & gas production platforms to an onshore processing facility. It’s critical that the valve actuators reliably perform their function to close the valves when a shutdown command is issued by the safety instrumented system.

Emerson’s successful cooperation between UK Sales Andy Pusey and Coos van Minnen, a member of the European sales development support team and an Oil & Gas and Pipelines Industry Specialist in the Valve Automation business unit, shared a story with me about the actuators designed to meet the requirements of this demanding application. They pointed me to an article, Giant Emerson valves going overseas. According to the article’s author:

Two valve actuators Emerson has been assembling for Shell UK, in Great Britain, are far too tall and heavy to be worked on indoors. Standing 18 feet [5.5m] high with a weight of six tons [5440kg], the actuators, which look like little more than long, thin tubes of steel but are actually high-precision instruments, are scheduled to be shipped overseas today.

Spring being mounted into the safety shutdown valve's actuator at Emerson's Valve Automation manufacturing facility.

Spring being mounted into the safety shutdown valve’s actuator at Emerson’s Valve Automation manufacturing facility.

Coos explained that this project included both schedule and technical challenges. From a technical standpoint, the actuation pressure required for the 30-inch [0.76m] gate valves would require a “never been done before” custom design. Because this valve actuator would be part of a Zone 1, IIB T3 safety instrumented function, the actuator design actuator would require safety certification per the IEC 61508 international safety standard.

Springs to meet the application requirements for the safety shutdown valves' actuators.

Springs to meet the application requirements for the safety shutdown valves’ actuators.

The schedule challenge was that the gas plant has a scheduled turnaround with a small, time window where the shutdown valves can be installed during the production stoppage. All of the necessary equipment and cranes will be present, so any schedule slippage would be costly. The total time frame from order to shipment to site was 18 months.

The actuators were designed, engineered, built, and assembled in the Emerson Process Management Valve Automation facility in Mansfield, Ohio. The design is based on the Bettis GVO Series of Linear Valve Operators scaled up to generate the required force to hold the safety shutdown valves open under startup and operating conditions. The actuators are a fail-close design held open by hydraulic-spring return design operating at 1900-3000 psig [131-207 bar] operating pressure. The actuator design complies with the European Commission’s Pressure Equipment Directive (PED) 97/23/EC and ATEX.

With the valve actuators now in route across the Atlantic Ocean to the European Valve Automation World Configuration Center in Hengelo, The Netherlands for the Cycle test, NAS 6 cleaning –Coating and installation of the Fireproof protection system to protect actuator and controls. This is done in accordance to the UL 1709 prior to being transported to the gas plant. This project will proceed in two phases to swap out each of the existing actuators with these new ones.

To connect and interact with Coos and other valve actuation professionals, join the Actuators track of the Emerson Exchange 365 community.

Popular Posts

Comments

Follow Us

We invite you to follow us on Facebook, LinkedIn, Twitter and YouTube to stay up to date on the latest news, events and innovations that will help you face and solve your toughest challenges.

Do you want to reuse or translate content?

Just post a link to the entry and send us a quick note so we can share your work. Thank you very much.

Our Global Community

Emerson Exchange 365

The opinions expressed here are the personal opinions of the authors. Content published here is not read or approved by Emerson before it is posted and does not necessarily represent the views and opinions of Emerson.

PHP Code Snippets Powered By : XYZScripts.com