Optimum Fermentation Requires Proper Valve Selection in Fluid Automation

by | Jun 30, 2022 | Fluid Control & Pneumatics, Food & Beverage

Amit Patel

Amit Patel

Fluid Control & Pneumatics Marketing Manager

The alcohol business is booming. The explosion of craft beers, demand for new wine blends and rise of international distilleries mean consumers now have more choices than ever. No matter the size, beverage manufacturers need to make sure their products maintain the same high levels of quality and taste.

The key lies in the fermentation process, which requires precise temperature control to ensure quality, consistency and taste across various beverage styles and flavors. Optimum temperature control requires the right valve system to control heating and/or cooling parameters.

Alcoholic beverage producers typically control tank temperatures using glycol or ammonia systems. This nontoxic liquid media flows through thermal jackets surrounding the fermentation tanks. In a closed circuit, the glycol is pumped through a chiller, where it is cooled, and then flows back down through the jackets — cooling the tanks and their contents. Not only does temperature affect the speed of the fermentation process, but it also affects the taste and quality of the final beverage.

Because fermentation is such a vital process, it’s no surprise beverage-makers increasingly are looking to install or upgrade their tank cooling and heating systems. But these modifications don’t come cheap, nor without challenges. Many facilities, particularly smaller operations, have limited physical space. As a result, tank systems need to be positioned as close as possible to each other to maximize floor space and remain accessible during maintenance.

 

Other challenges to consider include:

  • The high cost of energy: Energy is one of the largest overhead costs in the food and beverage industry. Because fermentation is considered a wet environment, beverage-makers also need to have additional electrical safety features in place.
  • Lengthy piping processes: The labor required for piping and wiring can be costly and very time-consuming.
  • Potentially unreliable yields: For wineries, in particular, any issues that compromise batches during extended fermentation periods equate to several years’ worth of lost time, materials and cost.

 

In addition to ensuring precise temperature control, proper valve selection can address the challenges associated with installing, maintaining and upgrading fermentation heating and cooling systems. Depending on the system, it also is important to select valves that are rated to handle glycol or ammonia.

Suppliers like Emerson can help an operation select the right fluid automation product to meet one’s individual needs.

 

The following valve solutions are all suitable for glycol or ammonia systems:

 

Two-way valves

Two-way valves are a traditional valve type for fermentation heating and cooling systems. The high-flow solenoid valves come in a range of pressure ratings, sizes and resilient materials like brass or stainless steel, providing long service life and low internal leakage.

Next-Gen valves

Next-Generation solenoid valves include several electrical enhancements designed for greater energy savings and a longer service life. Look for valves that incorporate power management circuits, as well as electrical surge suppression to both the solenoid and electronic controls.

ASCO Series 290 Angle Body Valve Group

The ASCO™ Series 290 Angle-Body Piston Valve (also known as 8290) is offered in full stainless steel for washdown and tri-clamp connection for easier cleaning and maintenance.

Because the valve’s DC characteristics now rival AC pressure and flow values, manufacturers can eliminate AC output cards to simplify control, reduce wiring costs and provide safer working environments for DC users.

 

Angle body valves

Air-operated, direct-acting angle body valves are ideal for aggressive and high-viscosity fluids. Many models feature a straight-through design and wide range of advanced options, including a signaling box, compact positioner for proportional control, and stroke limiter. They allow tight shutoff in both directions and contain no bleed holes — eliminating the chance of glycol plugging.

 

Six-port valves

Comprised of two actuators, six-port valves provide the benefits of the traditional angle seat valve in a single body design. Manufacturers can use one valve body to control hot and cold glycol supply and return flows, which reduces installation time.

 

AVENTICS G3 Pneumatic Valve

The AVENTICS™ G3 is the only pneumatic valve manifold that contains a graphical display used for configuration, commissioning, and diagnostics.

 

In addition to proper valve selection, it’s important to consider automating your fermentation heating and cooling systems to achieve even greater thermal precision. For example, the G3 Electronic Fieldbus Platform makes this process quick, simple, and painless. G3 integrates communication interfaces and input/output (I/O) capabilities into your pneumatic valve manifolds — allowing your PLC to more efficiently turn valves on and off.

 

Visit our webpage for more information about temperature control valves for fermentation 

Popular Posts

Comments

Subscribe for Updates

Follow Us

We invite you to follow us on Facebook, LinkedIn, Twitter and YouTube to keep up to date on all the latest news, events and innovations to help you take on and solve your toughest challenges.

Want to re-purpose, reuse or translate content?

Please do, Just link back to the post and send us a quick note so we can share your work. Thanks!

Our Global Community

Emerson Exchange 365

The opinions expressed here are the personal opinions of the authors. Content published here is not read or approved by Emerson before it is posted and does not necessarily represent the views and opinions of Emerson.