Test Isn’t Boring: A New Podcast Makes the Case to Test Engineers

by , | Nov 20, 2026 | Test & Measurement | 0 comments

Is test boring? Not according to the hosts of The Pass/Fail Podcast, a new podcast about what it takes to build, test, and bring a product to life. In the first episode, “Test Isn’t Boring!“, Emerson’s Jayson Wilkinson, Chief Product Marketer for Control and Monitoring in Emerson’s NI Test & Measurement business, and Amy Share, Content Manager at Averna Powered by Spherea, trade stories that show why test is one of the most creative jobs in engineering.

The Pass/Fail Podcast-A podcast for Test Engineers. Episode 2

Why It Matters

Every product people trust without thinking, from a light switch to a pacemaker, carries a hidden cost of certainty, and that cost is test. Test engineers pay it, often under schedule pressure and with little recognition. This episode gives that work its due and offers practical lessons on when to bring test into a project.

Key Takeaways

  • Skipping test does not save money. It moves the cost downstream, where it grows.
  • Great test engineers share curiosity and creative problem solving across mechanical, electrical, software, systems, and statistics skills.
  • Test concepts carry across industries. Automated inspection raised sausage casing throughput from 30 to 200 meters per minute.
  • Good test looks past the product to real-world conditions and to how the test station fits the factory floor.
  • Start test early and schedule generous time for it, because test is what gets compressed when design runs late.

What Can a 1970s Car Teach Us About Skipping Test?

Jayson opens with the car he drove in high school, a Chevy Vega. It won Motor Trend Car of the Year in 1971, but it was built quickly using technological shortcuts that went largely untested. Many engines failed between 30,000 and 60,000 miles, and the Vega is now remembered as one of the worst cars ever made.

Amy’s response is direct: test is not optional. Nobody is really anti-test, she says, but because it is a different discipline from product development, it gets pushed aside like homework until it cannot be pushed any longer. The real question is when to start and how to do it efficiently.

What Makes a Great Test Engineer?

You cannot get a degree in test engineering. The job pulls from many fields at once, and Amy describes colleagues who span mechanical, electrical, software, and vision engineering. One grew up obsessed with Lego. Another spent his childhood taking apart TVs with his father to measure voltages. The common thread is curiosity and a drive to solve problems that do not have answers yet.

Jayson’s own path into test started with a misunderstanding. A professor told him to learn LabVIEW, so he learned a lab oscilloscope app his class called LabVIEW and put it on his resume. On day one of a 3M internship, he was handed three LabVIEW projects. He found the manual, learned the basics, and finished the first project in about a week. His managers thought he was a genius, and he decided to work for the company that made the tool.

Where Does Test Make the Biggest Difference?

The hosts share examples that show how far test reaches:

  • Sausage casings: Operators once inspected casings by hand at about 30 meters per minute. An automated defect inspection system raised that to 200 meters per minute with uniform, hands-free results.
  • Robotic surgical arms: Verifying motion and end effectors is only the start. Test stations also check the brakes, so the arm holds position if an earthquake or other event occurs.
  • Laser eye surgery: NI founder Dr. James Truchard wanted to make field-programmable gate arrays (FPGAs) usable by non-specialists, and that idea went into CompactRIO. An eye surgery expert used it to automate a laser procedure that had been difficult and painful to perform manually.
  • Test frameworks: One company built a framework to handle repetitive setup work and cut a test system effort that had run a year and a half down to a couple of months.

What Happens When Test Gets Squeezed to the End?

Environment matters. Amy recounts NASA astronaut Suni Williams’ experience, where a planned eight-day mission stretched to nine months at the International Space Station. Engineers identified the thruster problem, but the integration testing needed to confirm the fix could not be done, so no one would take the risk. On the ground, the same thinking applies to a phone left on a hot dashboard. Test engineers even consider ceiling heights, building power, and operator height when placing a test station.

Jayson has seen test compressed when design runs behind and launch dates hold firm. His advice: schedule generous time for test, start early, and test finished components before the full product is ready. He points to the book Skunk Works, where testing the complex SR-71 took years longer than planned but produced an aircraft that worked.

Listen and Subscribe

By the end, Jayson concedes: test is not boring, and anyone who thinks it is has not done it yet. Listen to the full “Test Isn’t Boring!” episode, then visit The Pass/Fail Podcast page to hear industry experts discuss the ins and outs of test and why test engineers are secret superheroes. Subscribe so you do not miss the next episode.

What is the Pass/Fail podcast?

Pass/Fail is a podcast about what it takes to build, test, and bring a product to life, from early prototypes and design decisions to validation, troubleshooting, and final production. It is hosted by Emerson’s Jayson Wilkinson and Averna Powered by Spherea’s Amy Share.

What skills does a test engineer need?

Automated test systems can require mechanical, electrical, systems, and software engineering skills plus statistics. The hosts say the most important traits are curiosity and creative problem solving.

Why should test start early in product development?

When design runs late and launch dates are held, test gets compressed, and issues can be missed. Starting early, testing finished components along the way, and scheduling generous time reduces that risk, and fixes cost more the later they are found.

What can test engineers learn from the Chevy Vega?

The Vega was built quickly using largely untested shortcuts, and many engines failed between 30,000 and 60,000 miles. Skipping test does not remove its cost. It shifts the cost to customers and the brand.

Comments

Author

Featured Emerson Expert

Follow Us

We invite you to follow us on Facebook, LinkedIn, Twitter and YouTube to stay up to date on the latest news, events and innovations that will help you face and solve your toughest challenges.

Do you want to reuse or translate content?

Just post a link to the entry and send us a quick note so we can share your work. Thank you very much.

Our Global Community

Emerson Exchange 365

This blog features expert perspectives from Emerson's automation professionals on industry trends, technologies, and best practices. The information shared here is intended to inform and educate our global community of users and partners.

 

PHP Code Snippets Powered By : XYZScripts.com